Jetski Trailer

Chassis

chassis-detail.png

Mark and cut the 4 x cross members, making sure that they are all identical in length and angle.

Lay on a flat surface and tack weld together to form the "V" cross member.

jetski-crossmembers.png

 

Cut the front chassis rail with the leading edge angle set 10mm back from the outside face to allow good galvanising drainage and to assist with wiring the trailer when complete.

jetski-chassis-rails.png

We are not quite ready to weld any components until we get the drawbar into position. - Click here to continue

Jetski Trailer Plan

$5.00

You can now purchase the full Jetski Trailer Plan and Construction Guide for only $5.00