Car Transporter Trailer

Drawbar Components

drawbar-highlighted.png

Cut and fabricate all the drawbar components as shown. Ensure accuracy and care is taken when fabricating and drilling the tilt and hinge plates.

drawbar-components-1.png

drawbar-components-2.png

Note - If you wish to increase the Gross Vehicle Mass (GVM) to a total of 3500kg, it is recommended that the main drawbar sections are increased to 127 x 51 x 6.0 RHS or a full ladder brace added to the 100 x 50 x 5.0 RHS drawbar. See here for details on drawbar bracing.

Car Hauler Trailer Plan

$5.00

You can now purchase the full Car Transporter Trailer Plan and Construction Guide for only $5.00